A professional measuring device from the renowned British brand PCL. The "II" version presented is a further development of the familiar AIRFORCE model on the market. The device is used for pumping all types of motor vehicle tires. The gun was developed for intensive use in tire servicing.

Robust design

The pressure gauge housing is protected by a damage-proof rubber. The handle is ergonomically shaped and fits perfectly in the hand. The inflation is controlled via a comfortable plastic handle. In the upper part of the gun body there are holes for hanging at any location, e.g. on a wheel mounting column. The tube is terminated with a stable compression end. This means that the tube is securely attached to the valve and you can inflate the tire safely or depressurize it.

Easy to use

The pressure gauge scale is clear and easy to read. Operation is facilitated by the two-range scale - the user can measure in cash (0-12) or lbf/in2 (0-170). The pressure can be adjusted with one hand. This is done via a knob on the housing of the scale, which is actuated with the thumb.

Pressure up to 15 bar

The maximum operating pressure of the gun is set at 15 bar, while the 180 cm long hose can withstand a pressure of up to 20 bar.

This document confirms that a factory calibration has been performed in accordance with standard EN 12645:2014 (86/217/EEC).

With this tire inflator from the well-known PCL brand, you can fill your tires, vent them and measure the pressure. This tire inflator contains a 180 cm hose and a pressure gauge with a scale of 0-12 bar. The air inlet is 1/4" and the working pressure is 0 to 12 bar.

The air hose is 180 cm long. Made from high-quality, impact-resistant material and suitable for professional car workshops.

This in turn leads to lower tire wear.

Technical data:

• Measuring range: 0-12 bar
• Accuracy: 0.1 bar
• Hose length: 180 cm
• Euro Clip-On