Mobile waste oil extractor 70 l

The mobile device with 70 liter container is suitable for the extraction of used oils and other non-aggressive liquids of danger class A-III from all kinds of vehicles. The suction process works by vacuum directly from the dip stick tube with suction tube or adaptors. After the vacuum pump has created a vacuum, the suction unit can be operated independently from the air supply. The container must be pressurized again at 0,5 bar (3,5 psi) for discharging.

Main features:

• mobile - mains-independent - suction unit with compressed air discharge
• 70 l capacity
• compact, robust steel container
• two big wheels and two reinforced castors
• 1,5 m discharge hose with rubber handle
• vacuum pump with display
• shut-off valve
• 2m vacuum hose with handle, non-drip valve and standard adaptor (suitable for all suction tubes as well as for Mercedes-Benz vehicles)
• additional adapters for the VW Audi Group or for PSA and BMW vehicles 
  
• suctiontube holder with the following suction probes:
  • flexible: 1000 mm long ø 7 x 5 mm
  • flexible: 700 mm long ø 6 x 4 mm
  • flexible: 700 mm long ø 8 x 6 mm
  • rigid: 700 mm long ø 5 x 4 mm
  • rigid: 700 mm long ø 6 x 5 mm
  • Ford specific probe!
• Cylinder with 10 liter capacity for the visual control (volume and quality) of the extracted oil
• Effective suction capacity roughly 50liters

To achieve fast and efficient extraction results, the oil should have a temperature of 80 ° C. Effective suction capacity approx. 50 l. The device is approved for waste oils of hazard class A III of known origin with a flash point above 55 ° C, not to be used for liquids of hazard class AI, AII and B.