Mobile waste oil extractor 70 l

The mobile device with 70 liter container is suitable for the extraction of used oils and other non-aggressive liquids of danger class A-III from all kinds of vehicles. The suction process works by vacuum directly from the dip stick tube with suction tube or adaptors. After the vacuum pump has created a vacuum, the suction unit can be operated independently from the air supply. The container must be pressurized again at 0,5 bar (3,5 psi) for discharging.

Used for the following models, among others:

• Edge 2016.00 (built from 01/2019)
• Focus 2019 (built from 01/2019)
• Mondeo 2014.75 (built from 01/2019)
• S-MAX/Galaxy 2015.50 (built from 01/2019)
• Transit/Tourneo Connect 2014.00 (built from 05/2018)
• Transit/Tourneo Courier 2014.50 (built from 05/2018)

Main features:

• mobile - mains-independent - suction unit with compressed air discharge
• 70 l capacity
• compact, robust steel container
• two big wheels and two reinforced castors
• 1,5 m discharge hose with rubber handle
• vacuum pump with display
• shut-off valve
• 2m vacuum hose with handle, non-drip valve and standard adaptor (suitable for all suction tubes as well as for Mercedes-Benz vehicles)
• additional adapters for the VW Audi Group or for PSA and BMW vehicles 
  
• suctiontube holder with the following suction probes:
  • flexible: 1000 mm long ø 7 x 5 mm
  • flexible: 700 mm long ø 6 x 4 mm
  • flexible: 700 mm long ø 8 x 6 mm
  • rigid: 700 mm long ø 5 x 4 mm
  • rigid: 700 mm long ø 6 x 5 mm
  • Ford specific probe!
• Cylinder with 10 liter capacity for the visual control (volume and quality) of the extracted oil
• Effective suction capacity roughly 50liters

To achieve fast and efficient extraction results, the oil should have a temperature of 80 ° C. Effective suction capacity approx. 50 l. The device is approved for waste oils of hazard class A III of known origin with a flash point above 55 ° C, not to be used for liquids of hazard class AI, AII and B.